You are using an unsupported browser.
Some features of this site may not function properly. For optimal user experience, please view this site in Chrome, Firefox, Safari, or Edge.

XCell ATF® | Single-use

Simplify and intensify upstream bioprocessing with single-use convenience. The XCell ATF®  Single-use System delivers 100% cell retention and lab-to-production scalability without autoclave and lengthy setup steps.

 XCell ATF® | single-use

The XCell ATF® Single-use System delivers the same superior performance as corresponding stainless steel XCell ATF® Systems, but with significantly reduced implementation time. Eliminated are the need for autoclave cycle development, autoclave cycle validation and pre-autoclave workflow.  The system is designed to work with the single-use workflows that are increasingly adopted in bioprocessing to realize flexibility, convenience and cost/resource savings.

The XCell ATF® Single-use System comes in multiple sizes from lab-scale to production-scale. Each system consists of a single-use device, a single-use hollow fiber filter cartridge, and a control system.

  • 提供0.2μm 聚醚砜或0.2μm 聚砜中空纤维过滤器
  • Same pump and diaphragm configurations as stainless steel XCell ATF® Systems
  • 轻便而稳定

XCell ATF® 2
Single-use

XCell ATF® 6
Single-use

XCell ATF® 10
Single-use

100% 细胞截留

高产量、细胞浓度和活性

安装加快80%

简化安装操作,无需高压灭菌

一次性使用

以伽马辐照、双层袋包装供货;配有方便使用的可抛弃型无菌快接头

 

可放大性

从工艺开发规模到生产规模

灵活性

可连接任何生物反应器,实现不同应用目的

全球支持

现场应用和客服专员,提供全球化的支持

Repligen在ISO 9001质量管理体系下开发和生产用于生物制药行业的产品。我们专注于及时交付高质量、一致且稳健的产品,以确保我们客户的业务连续性。

关于Repligen生产

细胞生长、活性和产率

The XCell ATF® Single-use devices exhibit similar cell growth, viability and cell-specific productivity compared to the same-size stainless steel XCell ATF® Systems.

过滤器润湿程序

XCell ATF® single-use devices are supplied dry. To ensure robust filter performance, it is important to wet the filter prior to use.  The XCell ATF® Tubing Set and the suggested wetting protocols are designed to:

  • 降低润湿过程中气泡的形成,以确保过滤器被有效且完全地润湿
  • 方便进行使用前过滤器完整性测试,同时维持无菌性
  • Provide a means for evaluating the sterility of the XCell ATF® device prior to establishing the bioreactor connection
  • Allow change-out of the XCell ATF® device during a cell culture run without interrupting the bioreactor or XCell ATF® operation

Two wetting procedures have been developed: an off-line procedure and an on-line procedure.  After filter wetting, a filter integrity test can be performed. Additional detail can be obtained in the XCell ATF® Single-use User Guides.

Watch the video to see the XCell ATF® offline wetting procedure.

系统和部件

全部展开

XCell ATF® 2  Single-use Device
with C24 Controller

XCell ATF® 6 Single-use Device
with C410 Controller

XCell ATF® 10 Single-use Device
with C410 Controller

XCell ATF® 2 Single-use Device
0.2 µm PS
Part Number suATF2-G02PS

XCell ATF® 2 Single-use Device
0.2 µm PES
Part Number suATF2-S02PES

XCell ATF® 2 Single-use Stand
Part Number suATF2-STAND

XCell ATF® 6 Single-use Device
0.2 µm PS
Part Number suATF6-G02PS

XCell ATF® 6 Single-use Device
0.2 µm PES
Part Number suATF6-S02PES

XCell ATF® 6 Single-use Stand
Part Number suATF6-Stand

XCell ATF® 10 Single-use Device
0.2 µm PS
Part Number suATF10-G02PS

XCell ATF® 10 Single-use Device
0.2 µm PES
Part Number suATF10-S02PES

XCell ATF® 10 Single-use Stand
Part Number suATF10-Stand

XCell ATF® C24 Controller
for XCell ATF® 2 Single-use Device

XCell ATF® C410 v4 Controller
for XCell ATF® 6 and ATF 10 Single-use Devices

XCell ATF® C410 Controller Cart
for XCell ATF® C410 Controller

XCell ATF® 6 Single-use Tubing Set

产品编号 suATF6-TubeSetKit

XCell ATF® 10 Single-use Tubing Set

产品编号 suATF10-TubeSetKit

资源

全部展开