替换零件
CTech™ Variable Pathlength Technology Replacement Parts
Need a replacement part? We’ve got you covered.
Get in touch with a Repligen Analytics Representative to keep your operation running smoothly.
Keep your lab running efficiently

Quick Set Coupler Insert
Compatible with: SoloVPE
Upgrade your SoloVPE from the TBA Fibrette Coupler to the user-friendly Quick Set Coupler Insert. Never worry again about whether the Fibrette was pulled down too little or too much. This simple magnetic mechanism helps users prepare the Fibrette for measurement the same way every time.

GxP FlowVPX Flow Cell
Compatible with: FlowVPX
Size(s): 3mm,10mm, 22mm
FlowVPX Flow Cells are designed to work with the FlowVPX variable pathlength system and with GMP compliance in mind. The 3mm, 10 mm and/or 22mm Flow Cell can be used for higher volumes and more moderately scaled (pilot) process installations and comes with standard tri-clamp connections.
View Specification Sheet: 3mm GxP FlowVPX Flow Cell 10mm GxP FlowVPX Flow Cell 22mm GxP FlowVPX Flow Cell

TBA Coupler Insert Replacement
Compatible with: SoloVPE
Periodic replacement of the TBA Coupler Insert to help ensure optimal system performance is recommended. The Preventative Maintenance service offered includes replacement of this part. Replacement is recommended at least annually and every six months for SoloVPE Systems that experience high usage (> 100 samples per week).

FlowVPE Flow Cell
Compatible with: FlowVPE
FlowVPE Flow Cells are designed to work with the FlowVPE variable pathlength system and are currently available in three sizes: 3 mm, 10 mm, and 22 mm. The 3 mm Flow Cell is most frequently used for laboratory work and comes with standard barb fittings. A Luer conversion kit is also available. The 10 mm and 22 mm Flow Cells can be used for higher volumes and more moderately scaled (pilot) process installations and comes with standard tri-clamp connections.

FlowVPE Flow Cell Kit
Compatible with: FlowVPE
FlowVPE Flow Cell and Fibrettes are designed to work with the FlowVPE variable pathlength system and comes in three sizes: 3 mm, 10 mm, and 22 mm. Each kit contains both a fully assembled Flow Cell and Flow Fibrette.

FlowVPE Fibrettes
Compatible with: FlowVPE
FlowVPE Flow Fibrettes are designed to work with the FlowVPE variable pathlength system. Flow Fibrettes come in two sizes, 3 mm and 10 mm, and must be matched with the same size Flow Cell. The 3 mm Flow Cell is most frequently used for laboratory work. The 10 mm Flow Cell can be used for higher volumes and more moderately scaled (pilot) process installations. The 10 mm Flow Cell can also be used with the FlowVPE vessel holder accessory to make measurements in the standard SoloVPE large silica vessel.

FlowVPE Fibrette Seal Kit
Compatible with: FlowVPE
When reusing Flow Cells and Flow Fibrettes, periodic seal replacement is recommended to ensure cleanliness, proper sealing, and optimal performance. The FlowVPE Fibrette seal kit comes with everything needed to replace the Fibrette seals in the Flow Cell. Available for both the 3 mm and 10 mm Flow Cells.

FlowVPE Window Kit
Compatible with: FlowVPE
When reusing Flow Cells, periodic window replacement is recommended to ensure cleanliness and optimal performance. The FlowVPE window replacement kits come with everything needed to replace the window and the window seal in the Flow cell. Available for both the 3 mm and the 10 mm Flow cells.